I love engineering challenges and I needed an elegant solution to mount a vertical antenna right on the corner of my house.
In the end, I used 3 x 24 inch T brackets from Barenco Antenna Hardware store. Poor Brian (Barenco owner) was a little confused by my request but he dispatched my order all the same and I’m pleased with the results.
By the way, a little tip. Don’t use those RawPlug type anchor bolts, they expand and they are tightened and could break off the side of the brick, particularly right on a corner. Instead, use Multi-Monti bolts. These cut a thread inside a pre-drilled hole. The beauty of Multi-Monti bolts is that you can remove them and re-install them at will. If you want to fill in the hole afterwards, use Frame Mastic from ScrewFix (or similar). You will never know your aerials were once there.
I was just about to bite the bullet to install an 18 inch overhang T & K bracket system from Barenco when James M0YOM called for a scaffolder to take his down because the brickwork was coming loose on the top bracket.