I’m pleased to report that after soldering hundred of connectors last Friday afternoon, the remote head for my marine-style TS-2000 installation worked perfectly, even though we had extended the head by 70 feet (21 meters).
How did we do this: The remote head requires extensions for a) 8 pin Microphone b) 2 core loud speaker and c) 4 core data. I had heard of a number of people complaining about RF feedback and other such “funnies” so I reduced the problems by over-specifying on the coax run (Ecoflex 10) and going completely over the top for the 8-pin mic and data cables.
The 8-pin microphone connector was a heavy-duty 8mm screened 25m reel from Farnell components at £90, expensive – but I felt worth it. The data was shoved down a neoprene style 4-core professional OFC microphone cable, as was the loud speaker.
The reason for the OFC microphone cable was an alert I had from a user on one of my Yahoo Groups suggesting that unless I used top-quality cable, the high frequencies might roll off on TX. Not being able to change the installation once the boat was built, I had no option but to buy the best cable I could find. As it happens, the audio is currently routed through the 8-core Mic lead, however I do have the option of running the mic audio through a spare pair from the professional microphone cable.
Tests demonstrated that nobody was wise to our remote head. No interference was discovered whether on our outgoing signal, nor on our data lines or speaker and control lines. Not one ferrite clip was used. Remarkable.
A first class effort. Thanks to james (M3YOM) for doing the soldering!